Power Transformer
Toroidal Transformer
Toroidal transformers are power transformers with a toroidal core on which the primary and secondary coils are wound. When a current flows through the primary, it induces an electromotive force (EMF) and then a current in the secondary winding, thereby transferring power from the primary coil to the secondary coil.
Oil Cooled Transformer
Providing you the best range of Oil Cooled Transformer, Toroidal Transformer, Oil Immersed Transformer, Laminated Transformer, Potential Transformer and Cast Resin Transformer with effective & timely delivery.
Oil Immersed Transformer
Oil immersed transformer, also called oil filled transformer, is a kind of voltage transformation device utilizing oil cooling method to reduce the transformer temperature. Different from the dry type transformer, the body of oil immersed transformer is installed in the welded steel oil tank filled with insulation oil.
Laminated Transformer
Laminate transformers are mostly used as line frequency, low frequency and low/high voltage step-up, step-down transformers. Two coils are wound over a core such that they are magnetically coupled. The two coils are known as the primary and the secondary. The eddy currents cause energy to be lost from the transformer as they heat up the core - meaning that electrical energy is being wasted as unwanted heat energy. Laminated means 'made up of insulated layers of iron 'glued' together' rather than being in a single solid 'lump'.
Potential Transformer
What is Potential Transformer. Potential transformer is a voltage step-down transformer which reduces the voltage of a high voltage circuit to a lower level for the purpose of measurement. These are connected across or parallel to the line which is to be monitored.
Cast Resin Transformer
Hanley Energy's cast resin transformers are dry-type transformers (CEI EN 60076-11). The magnetic circuit and windings are not immersed in an insulating liquid but are cast with an epoxy resin mixture. ... Cast resin transformers are a popular choice for use in commercial, industrial and residential sites.
Three Phase Transformer
A three-phase transformer is made of three sets of primary and secondary windings, each set wound around one leg of an iron core assembly. ... Three phase transformer core has three sets of windings. Those sets of primary and secondary windings will be connected in either Δ or Y configurations to form a complete unit.
Three phase transformers are designed to supply electric power to three-phase systems. These electrical devices have three circuit conductors and may or may not have a neutral wire. Three phase power is used by electric power distribution grids and to power large motors and other large loads.
Toroidal Core Transformer
The small transformers used in commercial electrical devices as TV, computers, audio systems can be built from two different core shapes: EI or square shape and toroidal shape. In the past, the EI core shape was more popular. ... The toroidal transformer core has round or donut shape. The wires are wound around this shape
